fogger trigger I'm building a control board to run props, light and foggers in my display his year. In the pictures, I take apart a fogger switch unit and rewire it to trigger from a relay. The relay is controleld by a prop-1. Eventually, I changed the approach to use an extension IEC cable like this one: IEC cable Just Chop off the female end of the cable. Typically the relay is connected between the green and white wires, although I have also seen them wired beltween the black and white. It depends on how the fog machine is configured, so test it out first. If you really want a professional look, you can find a male IEC conmector to wire up the relay - then you dont need to chop up the IEC cable.

P1010013.jpg	P1010014.jpg	P1010018.jpg	P1010019.jpg
zfoggerswitch2.jpg